Bluestone Tile Maintenance

About Bluestone Tiles

Bluestone Tiles are Basalt, a naturally occurring fine grained blue-grey-black volcanic rock. Tiles are sawn from large boulders then the surface is treated. Extremely hardwearing, Bluestone Tiles offer a durable surface with good scratch and slip resistance and minimal maintenance requirements. The stone is extremely tough and can be used in the most demanding situations, indoors and outdoors.

Cleaning Bluestone Tiles

Bluestone Tiles require regular cleaning with a PH neutral cleaner. Do not use bleach based or acid based products as these may damage the surface of the tile. Tiles with a rough or textured surface may benefit from the use of a doodlebug rather than a mop for a more effective clean.

Common Cleaning Mistakes

• Using the wrong cleaning products – too harsh a chemical or too abrasive a cleaner.

• Using too much product – dilute as per instructions, more is NOT better.

• Applying too much water to the surface / flooding the area.

• Not changing the water or cleaning solution often enough.

• Not finishing with a rinse to remove any cleaner / chemical residue.

• Leaving residual moisture on the floors – make sure to dry mop, wet vac or dry with an old towel or rag so that there is no residual moisture left on the floors (especially in the grout joints).

Sealing Bluestone Tiles

Act NOW to Protect Your Bluestone Tiles & Grout….

Sealing of Bluestone Tiles is necessary to protect them from premature decay and contamination, ie, oil, grease and dirt. Even old Bluestone Tiles and grout can be cleaned and resealed to give them back a new lease of life! Sealing your Bluestone tiles and grout provides reaction time to deal with spills and so forth. An unsealed floor can stain immediately, whereas a sealed floor is stain resistant and can provide a reaction time of up to 4-5 hours. At Total TileCare we strongly recommend that any newly laid Bluestone Tiles and grout be sealed immediately so that the area gains the full benefit of the protection.

1. Prevent unsightly stains
2. Prevent discolouration
3. Keep your tiled floors looking better for longer

About Grout

Grout is a porous product and should always be sealed. Once discoloured, regrouting is the best option for renewing grout between porous tiles.

How Total TileCare Can Help

Newly Laid Tiles

Professional Tile Cleaning – to remove grout residue or grout haze.

Professional Sealing – to protect the new Bluestone Tiles & grout.

Existing Tiles

Professional Tile Cleaning – to remove build-up of dirt and other contaminants.

Professional Sealing or Re-Sealing – to protect the Bluestone Tiles &/or grout.

Tile Regrouting – for cracked, deteriorated or discoloured grout.